Search, Login, Account Categories

Startech 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe PEXM2SAT3422

Features

(Pictures are For Illustration Purposes Only)

Startech

pdf brochure downloadDownload Brochure


Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCI Express


  • Recover data or improve the performance and storage capacity of your desktop, by adding two M.2 solid-state drives (SSD) plus two SATA III drives


  • Create a high-performance hardware RAID array to protect and back up your data or expand your storage — supports RAID 0, 1, 10 (1+0)


  • Wide installation compatibility, with support for virtually all M.2 NGFF drives (22110, 2280, 2260, 2242, 2230), as well as hybrid drives


This M.2 SSD RAID controller card lets you install two M.2 NGFF (Next Generation Form Factor) drives in your desktop computer. The card also features two SATA III (6Gbps) ports and supports hardware RAID. Now, you can merge the speed and compact size of M.2 solid state drives (SSD) with the storage capacity of traditional hard disk drives (HDD).


Leverage the size and speed of M.2 drives


This M.2 controller card lets you take advantage of the size and performance benefits of NGFF SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.


When you couple the card with an M.2 drive, you can give your computer’s performance a noticeable speed boost. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.


Peace of mind, with simple and cost-effective data recovery


Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.


Build a high-performance RAID array


If you need a scalable, internal storage solution that you can count on, then this card can help. It supports a range of RAID configurations (RAID 0, 1, and 10), giving you multiple ways to expand your storage, improve your computer’s performance, or to create data redundancy backups.


Connect even more drives with port multiplication


Because the M.2 card supports port multiplication, you can connect up to four drives to one of the card’s SATA ports. With a built-in port multiplier, you can install up to seven drives (two M.2 SSDs, five SATA drives) in your computer through this single drive controller.


Supports a wide range of drives


You can rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230. For more versatility, the card also supports hybrid drives.


The PEXM2SAT3422 is backed by a StarTech.com 2-year warranty and free lifetime technical support.


Applications
  • Increase the internal storage capacity of your standard or small form-factor computer
  • Create a RAID array and add the security of data redundancy and increased storage to your PC
  • Access and recover data from almost any M.2 SSD, such as drives pulled from laptops and other computers
  • Optimize your system for I/O intensive applications such as office suites, photo and video editing, and media players

Warranty Information

Warranty

2 Years

Hardware

Bus Type

PCI Express

Card Type

Standard Profile (LP bracket incl.)

Chipset ID

Marvell - 88SE9230

Industry Standards

Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)

PCI Express 2.0

Hardware RAID 0, RAID 1, RAID 10

Interface

M.2 SATA (NGFF)

SATA

Port Style

Integrated on Card

Ports

2

Performance

ATAPI Support

Yes

Bootable

Yes

Number of Drives Supported Through Port Multiplier

1 to 4

Number of Ports That Support Port Multiplier

2 (can only use 1 PM at a time)

Port Multiplier

Yes

RAID

Yes

Supported RAID Modes

JBOD - (Just a Bunch of Disks)

RAID 1 (Mirrored Disks)

RAID 0 (Striped Disks)

RAID 10 (1+0, Striped set of Mirrored Subset)

Type and Rate

SATA III (6 Gbps)

Connector(s)

Connector Type(s)

1 - PCI Express x4 Male

Internal Ports

2 - M.2 (NGFF, B-Key) Receptacle

2 - SATA (7 pin, Data) Plug

1 - SP4 (4 pin, Small Drive Power) Male

Software

OS Compatibility

Windows® XP, Vista, 7, 8, 8.1, 10

Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016

Mac OS® 10.6 to 10.12

Linux 3.5.x to 4.4.x LTS versions only

Special Notes / Requirements
Note
The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.

The card's two SATA ports support port multiplier, up to seven drives total (including two M.2 drives). Only one SATA port can use port multiplier at a time, with up to four drives total connected through PM (in a non-RAID configuration)

System and Cable Requirements

PCI Express x4 slot (backward compatible with x8, and x16 slots)

Indicators

LED Indicators

2 - M.2 drive LEDs (Green)

3 - Pin headers for LEDs

Environmental

Humidity

20%~80% RH (Non-condensing)

Operating Temperature

5°C to 50°C (41°F to 122°F)

Storage Temperature

-25°C to 70°C (-13°F to 158°F)

Physical Characteristics

Product Height

4.7 in [120 mm]

Product Length

7.1 in [180 mm]

Product Weight

2.4 oz [68 g]

Product Width

0.8 in [20 mm]

Packaging Information

Shipping (Package) Weight

6.1 oz [174 g]

What's in the Box

Included in Package

1 - M.2 SSD RAID controller card

1 - low-profile bracket

2 - M.2 mounting screws

1 - quick-start guide



2X M.2 NGFF SSD RAID CONTROLLER CARD PLUS 2X SATA III PORTS - PCIE


Brand Name: StarTech.com
Controller Type: Serial ATA/600
Form Factor: Plug-in Card
Host Interface: PCI Express 2.0 x4
Product Type: SATA Controller
RAID Levels: 0
RAID Levels: 1+0
RAID Levels: 10
RAID Levels: JBOD
RAID Supported: Yes
Total Number of SATA Ports: 2


Basic

Brand Name:

StarTech.com

Controller Type:

Serial ATA/600

Form Factor:

Plug-in Card

Host Interface:

PCI Express 2.0 x4

Product Type:

SATA Controller

RAID Levels:

0

1+0

10

JBOD

RAID Supported:

Yes

Total Number of SATA Ports:

2
General Information

Brand Name:

StarTech.com

Manufacturer Part Number:

PEXM2SAT3422

Manufacturer Website Address:
http://www.startech.com/au

Manufacturer:

StarTech.com

Packaged Quantity:

1

Product Name:

2x M.2 NGFF SSD RAID Controller Card Plus 2x SATA III Ports - PCIe

Product Type:

SATA Controller
Interfaces/Ports

Number of SATA Ports (Internal):

2

Total Number of SATA Ports:

2
Miscellaneous

Platform Supported:

Linux

Mac
Physical Characteristics

Depth:

180.3 mm

Form Factor:

Plug-in Card

Height:

119.4 mm

Weight (Approximate):

99.2 g

Width:

20.3 mm
Technical Information

Controller Type:

Serial ATA/600

Host Interface:

PCI Express 2.0 x4

RAID Levels:

1+0

10

RAID Supported:

Yes
Print this page
Information
SKU/Item No.:564927
Vendor Part No.:PEXM2SAT3422
UPC/EAN Number.:65030863766
Our Stock **.:     (more info below)
Price.:
$162.08
Quantity .:
QR 2D barcode QR 2D PEXM2SAT3422
Product link.: No link
Manufacturer's link .: Startech
Related Product(s)
Review Link(s)
* Indication only, please consult the supplier stock level below.
** This is the stock level in our warehouse.
** Please check Stock Information below for out of stock items.

Stock and Freight Information

Stock Information
 Our Qty in StockAvailability and ETA
Our own stock0Usually 1-3 days (when supplier has stock)
 Supplier's Qty in StockAvailability and ETAUpdated
Supplier one
1228/03/17 08:57AM

barleft
What customers have said about us.sepInformation regarding stock and freight costsepAbout our companysepEyo Technologies' contact detailssepTrading terms and conditionssepPrivacy statementsepbarright