Netgear WAG102, ProSafeT Dual Band Wireless Access Point WAG102AU

Physical Specifications

Dimensions (H x W x D): 32 x 190.5 x 122 mm
Weight: .62 kg

Wireless

 Standard: IEEE 802.11a up to 108 Mbps; 802.11g up to 108 Mbps Wireless Access Point

Antennas: Two (2) detachable antennas: (1) 5 dBi, 2.4 GHz and (1) 5 dBi 5 GHz

Physical Interfaces

LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support

Power adapter: 12 VDC, 1.0A power supply; plug is localized to country of sale.

Six (6) LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g

Antenna Connector: Two (2) reverse SMA antenna connectors

Network Management

 Remote configuration and management through Web browser, SNMP

SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB

Advanced Wireless Features

Point-to-point wireless bridge mode

Point-to-multipoint wireless bridge mode

Repeater mode

Adjustable Transmit Power Control (TPC) from 100 mW down to 0 mW

Typical Maximum Power Output

802.11b mode, 1 to 11 Mbps + 19 dBm

802.11g mode, 6 to 24 Mbps + 18 dBm

802.11g mode, 36, 48 and 54 Mbps + 17/16/16 dBm

Security

40/64-, 128-, and 152-bit WEP encryption

Block SSID Broadcast

VPN pass-through support

MAC address filtering with access control lists – up to 256 users

802.1x RADIUS support with EAP TLS, TTLS, PEAP

Wi-Fi Protected Access (WPA2)

Secure Socket Layer (SSL) remote management login

Note

Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance.