D-Link Air Outdoor 6m Length Extension Cable M to F ANT24-CB06N

Device type

SWITCHES/ROUTERS/ANTENNAS

Host interface

Modem design

LAN Ports

Misc.

ANT24-CB03N - 3m Antenna Extension Cable

ANT24-CB06N - 6m Antenna Extension Cable

ANT24-CB09N - 9m Antenna Extension Cable

Warranty

Weight

Extra

Products Features:

Designed for outdoor or rooftop installations

Weather resistant

Protected with PCV plastic that is strong but flexible enough to fit into tight working spaces

Conform to the highest standards and have been certified by UL Laboratories

Product Description:

D-Link, the industry pioneer in wireless networking, introduces the D-Link ANT24-CB06N Antenna RF Cables. This products are designed for outdoor or rooftop installations when distance between a wireless Access Point (AP) and an antenna is required. With these Radio Frequency (RF) cables and D-Link’s ANT24 line of outdoor antennas, an indoor wireless AP/Bridge can be used in an outdoor deployment*.

* Installers should abide by all FCC or local regulations and requirements before deploying outdoor antennas.

The D-Link ANT24 Antenna RF Cables are available in three lengths: 3m (9.84ft); 6m (19.68ft); and 9m (29.52ft). All of them can be inter-connected. On one end of each cable is an “N-plug” and on the other end is an “N-jack” with high-quality N-type connectors.

The D-Link Antenna RF Cables are based on the HDF-400 specification to minimize the signal loss introduced to a wireless LAN. The frequency responses of the cables coincide with the 2.4GHz ISM band so that the cables are ideal for both IEEE 802.11b and IEEE 802.11g WLANs. With 50 ohms of impedance, the RF cables can be used with most D-Link WLAN products. This impedance match eliminates any Voltage Standing Wave (VSW) issues in an RF circuit, and any noticeable decrease in the amplitude of the RF signal.

D-Link includes a RF pigtail adapter in N-type and SMA connectors with each of its ANT24 antennas. The D-Link Antenna Cables can be easily installed with surge protectors and D-Link Wireless APs.

Using these reliable pre-cut RF cables with their pre-installed connectors ensures that the WLAN equipment operates optimally, providing the best performance possible. With a ANT24 Cable, deployment of an outdoor WLAN is now easier and more flexible than ever!